logo  
Product Range
bottom Shadow
 
 
   
 
Lab Heating & Refg. Equips

Notice: Undefined index: subcatid in I:\wamp\www\vitco\product.php on line 59

Notice: Undefined variable: lmt in I:\wamp\www\vitco\product.php on line 68
[1]
Search Results : 20 Product(s) Found.
 
HOT AIR OVEN (Memmert Type)Three side Heating  [VT.401.01.CH]
 
CONSTRUCTION
Vitco Oven is double wall designed on memmert pattern. The inner chamber is made of Aluminum/S.S. with grooves to adjust shelves at any convenient height. The gap of 3" between the two chambers is filled with pure white high grade Glass wool to avoid the loss of heat. The door is fitted or heavy chromium plated hinges with A spring and automatic roller to and fro latch made of brass.
ELEMENTS
Heating elements are made of nickel/chromium plated nichrome wire, which are placed in the ribs at the bottom and sides.
TEMPERATURE CONTROL
A precision thermostat to work from 5c above room temperature to 250c with an accuracy of +/- 1 to 2c controls the temperature.
VENTILATION
Air Ventilator is placed near the top of the sides. which transfer air by gravity convention.
NORMAL EQUIPMENTS
The panel, which is below the door, consists of 3-heat switch for low medium and high, two pilot lamps and a thermostat built up in L shaped Horizontal thermometer, two movable metal shelves, plug and cord to work on 220/30 Volts A/C.
FINISH
finished in durable blued white stove enamel paint.

Available Sizes:

Cat.No.

Height

Width

Depth

capacity

VT.401.01.A

12"

12"

12"

28 Ltrs.

VT.401.01.B

14"

14"

14"

45 Ltrs.

VT.401.01.C

16"

16"

16"

65 Ltrs.

VT.401.01.D

18"

18"

18"

95 Ltrs.

VT.401.01.E

24"

18"

18"

125 Ltrs.

VT.401.01.F

24"

24"

24"

224 Ltrs.

VT.401.01.G

36"

24"

24"

336 Ltrs.

Optional Accessories for Hot air Oven :

  • Air Circulating Fan
  • Timer 0 - 24 Hours
  • DIGITAL Temperature Indicator
  • Digital Temperature Indicator cum controller
  • Microprocessor PID controller

*For Special Dimension and Sizes please contact us at info@vitcolab.com

 
Incubator Bacteriological (Memmert Type)  [VT.401.02.CH]
 

CONSTRUCTION
Vitco Bacteriological Incubator is double wall designed on memmert pattern. The inner chamber is made of Aluminum/S.S. with grooves to adjust shelves at any convenient height. The gap of 3" between the two chambers is filled with pure white High grade Glass wool to avoid the loss of heat. The door is fitted with heavy chromium plated hinges with A spring and automatic roller to and fro latch made of brass with observation window.
ELEMENTS
Placed at the bottoms and sides for uniform temperature.
TEMPERATURE CONTROL
Temp is controlled by a sensitive thermostat to work on 5 c. To 70 c with temp uniformity of 0.5 c.
VENTILATION
Air Ventilator Are placed near the top of the sides Which transfer air by gravity convention
NORMAL EQUIPMENTS
The panel which is below the door consists of 3 heat switch for low medium and high, two pilot lamps and a thermometer is fitted just above the door with the range of 0 to110 .Two moveable metal shelves, plug and cord to work on 220/30 Volts A/C.
FINISH
It is finished in durable blued white stove enamel paint.

Height

Width

Depth

capacity

12"

12"

12"

28 Ltrs.

14"

14"

14"

45 Ltrs.

16"

16"

16"

65 Ltrs.

18"

18"

18"

95 Ltrs.

24"

18"

18"

125 Ltrs.

24"

24"

24"

224 Ltrs.

36"

24"

24"

336 Ltrs.

Optional Accessories for Incubator

  • Air Circulating Fan
  • Timer 0 - 24 Hours
  • Digital Temperature Indicator
  • Digital Temperature Indicator cum controller
 
Incubator B.O.D.  [VT.401.03.CH]
 
VITCO B.O.D Incubator are Designed for low temperature incubation and routine determination of Bio-chemical oxygen Demand (B.O.D.). Inner chamber made of anodized Aluminium or S.S. sheet. Supplied with 2/3 removable perforated shelves. Exterior made out of mild steel sheet duly finished in white Powder Coated paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The cabinet is mounted on castors.Temperature is controlled by a sensitive thermostat form 5 c to 50 C 1 C. For lower temperature working, a standard cooling unit with a sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher temperatures. Inner air circulating system is provided to achieve uniform temperature in the whole chamber. A control panel is provided with various indicators, on-off switch, L-shaped thermometer.

Inner Chamber Size in Inches: Capacity in Cubic Ft.

A) 24" x 18" x 16": 4.00 Cft.

B) 33" x 20" x 16.5": 6.00 Cft.

C) 36" x 26" x 23": 12.00

Cft.Optional (Extra Cost):

i. Digital Temperature Controller-cum-indicator.

ii. Timer 0-24 hours day night cycle.

iii. Co2/air mixture inlet nozzle.
 
Rectangular Muffle Furnace (Laboratory Model)  [VT.401.04.CH]
 
Outer sheet made out of thick mild steel duly finished in attractive powder coating paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum temperature 1000C with working temperature 940C controlled with indicators, pyrometer, thermocouple, thermofuse etc. Workable on 220V AC 50Hz Single Phase.

Inner Muffle size in mm & inches.

225 x 100 x 100 (9" x 4" x 4")

250 x 125 x 125 (10" x 5" x 5")

300 x 150 x 150 (12" x 6" x 6")

300 x 200 x 200 (12" x 8" x 8")

450 x 225 x 225 (18" x 9" x 9")
 
Rectangular Industrial Muffle Furnace  [VT.401.04.CH.A]
 
Same specification as in VT.401.04.CH but with Maximum Temperature 1200 degrees Centigrade and working Temperature 1100 degrees.
 
Laboratory Hot Plates (Round)  [VT.401.05.CH]
 
VITCO Laboratory hot plates Round design, Body is fabricated out of thick mild steel sheet duly finished in powder coated paint. The hot plate made of cast iron, duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely laid under the plate. To operate on 220 V AC 50 Hz single phase. Temperature is controlled by a three-heat rotary switch. Provided with an indicator lamp for the mains and cord & plug.

A) HOT PLATE (Round), Single

Specifications as above, with 20 cm (8") dia. moulded top.
 
HOT PLATE RECTANGULAR  [VT.401.06.CH]
 
CONSTRUCTION

Vitco rectangular laboratory hot plates are electrically operated on 220 Volts AC with heavy casted top fitted on mild steel body.

HEATERS

Heater made of nichrome wire which are placed all over the plate to give equal and uniform temperature to every part of the plate.

HEATING

Heating of the hot plate can be adjusted to low, medium and high by means Of heat control.

FINISH

The Lower part of the body is made of mild steel is painted in blued white stove enamel paint and the top i.e the hot plate is painted in oven baked black.

Size:

10" x 12" x 6"

10" x 16" x 6"

12" x 18" x 6"

18" x 24" x 6"
 
Serological Water Bath  [VT.401.07.CH]
 
CONSTRUCTION

VITCO water bath are double walled inside made of heavy gauage brass/coppers heavenly tinned from inside and outer body of mild steel The gap of 1" between two wall is filled with glass wool as insulation to protect loss heat. The cover of the bath has a pyramid type of lid made of Aluminium.

HEATERS

The bath has U shaped immersion type heater, which is extended to the full length of the bath in order to maintain equal and uniform temperature.

TEMPERATURE CONTROL

The temperature is controlled by a sensitive thermostat to work from 5C Above room temperature to 80Cwith an accuracy of +-0.5 C.

FINISH

The equipment is Finished in a durable blued eyed enamel paint with a coloured panel and lid.
 
Water Bath Rectangular  [VT.401.08.CH]
 
THERMOSTATICALLY CONTROLLED

CONSTRUCTION

VITCO water bath are double walled inside made of heavy gauage brass/coppers heavenly tinned from inside and outer body of mild steel The gap of 1"between two wall is filled with glass wool as insulation to protect loss heat. The cover of the bath is made of brass/copper with concentricing of 75mm dia, which are nicely chromium plated.

HEATERS

The bath has U shaped immersion type heater, which is extended to the full length of the bath in order to maintain equal and uniform temperature.

TEMPERATURE CONTROL

The temperature is controlled up to 100 c with an accuracy of + 0.5 c.

FINISH

The bath is painted in blued white stoved enamel paint with a colored panel.

NORMAL EQUIPMENTS

The panel has an on off switch . Two light and a thermostat.It is also provided with a drain cork plug and cord to work on 220/30 Volts AC.

12" x 10" x 4" with 6 holes of 3" dia

12" x 12" x 4" with 9 holes of 3" dia

16" x 12" x 4" with 12 holes of 3" dia



Water Bath Rectangular (Single wall) VT.401.08.CH.A

Body made out of thick stainless steel. Top made out of chrome plated sheet. Concentric rings to cover 3" dia holes are provided. Heating elements have an automatic cut-off device which operates when the bath gets dried. Equipment working on 220 V AC 50 Hz single phase.A) 6 holes B) 12 holes.
 
Water Still (Manestry Type)  [VT.401.09.CH]
 
Made of Stainless Steel. Electrically operated for getting pyrogen-free distilled water automatically. Wall hanging space saving arrangement is provided. The Body & condenser is seamless. Fitted with automatic ejection device which operates automatically when water vessel gets dried.

Output Capacity (Approx.):

A) Output approx. 2/3 liters per hour

B) Output approx. 3/4 liters per hour

C) Output approx. 4/5 liters per hour
 
Melting Point Apparatus  [VT.401.10.CH]
 
A melting heating block is provided with holes to receive 3 capillary tubes and stem type thermometer. It can measure melting point up to 350C. The block is heated by superior heating element and temperature is controlled by a heat regulator. A shadow less lamp has been provided to illuminate the capillaries and a focusable magnifier facilitates in observations. Provided with indicator lamps, heat energy regulator, ON-Off switch, cord plug etc. Supplied without thermometer and capillaries.
 
Laboratory Stirrer  [VT.401.10.CHVT.401.11.CH]
 
Heavy & stable cast iron base duly painted with mild steel chrome plated upright rod. AC/DC motor with S.S. stirring shaft and blades, variable speed controlled unit is provided. 1/20 Hp Motor provided for smooth longtime stirring. Height of stirrer and stirring space adjustable. To work on 220V AC 50Hz Single Phase.
 
Magnetic Stirrer with Hot plate  [VT.401.12.CH]
 
VITCO magnetic stirrer is suitable for any type of stirring operation involving volumes from a very little quantity of liquid upto one litres. Stirring is accomplished by means of small rotor sealed in Teflon And is capable of rotating by magnetic field underneath at different Speed which is controlled by a regulator.

Hot plate can also be fitted for heating the liquid before or during the Operation stirring.

Magnetic Stirrer with heating system

Magnetic stirrer with hot plate & energy regulator.

Capacity 2 Liter, 5 Liter, 10Liter
 
CENTRIFUGE ELECTRICAL  [VT.401.13.CH]
 

For medical practitioners, pathological laboratories and hospitals for routing centrifuge tests. The standard unit is fitted with resiliently mounted motor for vibration-free performance, a built-in 5 step speed regulator and non removable angle rotor. Available in 5 models, complete with tube carriers and 15 ml plain tubes of neutral glass or 5 ml(RIA) plain tubes of heat resistant glass. Supply 220-240 volts, single phase 50 Hz. 210 x 210 x 210 mm

Max. Speed RPM

Max. CF "G"

Capacity ml

3500

1250

4 x 15

3500

1250

6 x 15

3500

1250

8 x 15

3500

1250

24 x 5

3000

1250

60 x 5

 

 
TISSUE WATER BATH  [VT.401.14.CH]
 
THERMOSTATICALLY CONTROLLEDVITCO

Tissue floatation bath is for preparing Tissue selection for prothrombin Detrimition and general incubation it is designed to remove wrinkles and distortion produce in embedding tissue section by the slicing of the microtome knife. The bath is doubled walled with one and a half inch wide ring at the top for Warming and drying the slides. If it is fitted with a thermostat to work on 220 Volt AC.
 
Heating Mantles  [ VT.401.15.CH]
 
Body is made one-piece aluminium and is logged with special mineral wool. The panel is provided with on-off switch, energy control knob, pilot lamp etc.Provided with joint less hand knitted heating nets of glass yarn capable of withstanding high temperature up to 400° C . Supplied complete with cord & plug, to work on 220 V AC 50 Hz single phase.
Single Size Wattage
A) 50 ml . 60
B) 100 ml. 60
C) 250 ml. 150  

D) 500ml. 200

E. 1000ml. 300

F) 2000ml. 450

G)3000ml. 450

H) 5000ml. 600

I)10000ml. 2x500
 
Laboratory Autoclave (Portable)  [VT.401.16.CH]
 
A compact easy to use electrically heated autoclave, in stainless steel. The lid locking system meets tough safety requirements. Equiped with pressure gauge, thermometer and safety valve normal operation is at 121 deg. C. Suitable for culture media.
 
 Size:
12" x 12"
12" x 16"
12" x 18" 

 

 
Laminar Air Flow Horizontal  [VT.401.17.CH]
 
To provide clean air to working platform horizontally.
  • sturdy - Duraboard - construction with elegant sunmica finish.
  • Silent motor and blowers fir vibration free unit 
  • Stainless steel working platform
  • HEPA filter efficiency 99.97% down to 0.3 micron
  • Pre filter efficiency 99% down to 5 micron.
  • UV germicidal lamp 15W/30W.  
  • Flourscent illumination
  • Static Pressure manometer and cock for gas
  • Foldable acrylic transparent of HEPA filter.
  • Removable covers to attend motor blower filters

    Sizes available:

    • 2’x2’x2’
    • 3’x2’x2’
    • 4’x2’x2’
    • 6’x2’x2’ ALSO AVAILABE IN MILD STEEL/ Stainless Steel Body construction
  •  
    Laminar Air Flow Vertical  [VT.401.18.CH]
     
    Specifications are same as in VT.401.17.Ch but in vertical design.
     
    Digital pH Meter  [VT.401.19.CH]
     

    Models with auto and manual temperature compensation are available.

    Technical Specifications :-

    • Display         :    3.5 Digit LED
    • Range           :    pH 0 to 14.0, mV 0 to ± 1999
    • Resolution   :    pH 0.01, mV 1
    • Accuracy     :    ph ±0.01pH, mV ±1mV
    • Temperature Compensation   :  Auto : 0 to 100°C .  Manual   : 0 to 100°C
    • Input Impedance : > 1013 ohms
    • Slope Control : 80 to 120%
    • Record Output  :   0 to 10m V/pH
    •                                   0 to 10 mV / 100mV Adjustable
    • Sensor         :    Combined pH Electrode

    *available in many Different Models, Please contact us at info@vitcolab.com for further details.

    [1]
    Home|Profile|Enquiry|Contact
    © Copyright 2006. Vinay Trading Co. All Rights Reserved.