logo  
Product Range
bottom Shadow
 
 
   
 
Physics lab
[1]
Notice: Undefined variable: key in I:\wamp\www\vitco\product.php on line 120
2
Notice: Undefined variable: key in I:\wamp\www\vitco\product.php on line 137
[ Next»]
Search Results : 35 Product(s) Found.
 
Buzzer in Vacuum  [109.1 PH]
 
An electric buzzer working on 2 to 4 V DC suspended in a bell jar 150 x 100 mm with connections to terminals mounted on a rubber bung sealing the jar. For use on pump plate not less than 150 mm dia.
 
Wave Form Helix  [109.2 PH]
 
For experiments in wave motion, pulses, reflection, & interference. Steel wire closed wound helix, 19 mm diameter; closed length 3 m extending to approx. 9 m.
 
Wave Form Helix (Slinky)  [109.3 PH]
 
For demonstrating wave motion. Helical coil of flat section tempered steel wire. Oil diameter 75 mm, closed length 110 mm, fully extended 5 m.
 
Simple Harmonic Motion Demonstration Model  [109.5 PH]
 
Demonstrates the relationship between simple harmonic motion & uniform motion round a circle. The unit consists of a black metal disc approx. 200 mm in dia supported on clear plastic base white marker 13 mm dia may be rotated just inside the periphery of the disc by means of a handle at the rear of the disc. Similar marker moves along a slot across the diameter of the disc, always in phase with the peripheral marker, performing simple harmonic motion when the handle is turned at a uniform speed. May be used with the slot horizontal or vertical.
 
Ripple Tank  [109.6 PH]
 
A wooden framed tray with sloping position inside to minimise unwanted reflection from the sides of the tank; with perspex plastic base & 4 detachable legs. Size of the tray 650 x 520 x 55 mm. Support rod with 'G' clamps are provided for using to carry waves generating system. Four metal barriers ( reflectors ) consisting of a pair of straight barriers 150 x 25 mm chord barrier of 215 mm chord length, 25 mm high & a short straight barrier. Ripples are produced by a small 1.5 to 4.5 V DC electric motor mounted on a 330 mm wooden bar having a row of holes to mount spherical dipper. Complete with 12 V illuminator with clamp.
 
Power Supply Unit  [109.7 PH]
 
For use with the ripple tank. It has continuously variable DC output so that the speed of the motor & the frequency of the ripples may be varied.
 
Dual Purpose Ripple Tank  [109.8 PH]
 
It is used as a demonstration model with an Overhead Projector. Comprises a steel frame with an acrylic window. The frame is shared to form beaches on all sides to minimise unwanted reflections & fits neatly onto an overhead projector. The undersides of the frame has threaded metal inserts to take the four legs provided enabling the tank to be used as a free standing beach model, if required. Facilities are provided for mounting the ripple tank illuminant for this purpose. A gantry is supplied for supporting a motor beam, the height of which is easily adjustable allowing it to be positioned for maximum effect. Ripples are produced by a small 1.5 to 4.5 V DC motor mounted on the plastic beam of 240 mm length. A standard cam is fitted to the motor spindle to give an oscillatory motion & row of nine holes in the beam are for mounting the spherical dippers for production of circular ripples.
 
Hand Stroboscope  [109.9 PH]
 

A slotted hardboard disc, with finger hole, is pivoted on a bearing mounted which also acts as a convenient handle. The disc has twelve radial slots 50 x 3 mm extending to its edge.

Diameter of the disc : 250 mm.

 
Stroboscope (Xenon)  [109.10 PH]
 

The instrument is housed in a strong metal case provided with a carry handle & rubber feet. An inclined rear panel carries the flash rate control, range selector, sockets, & switch for external synchronisation; & the power on/off switch.

Flashing Rate :
Range 1 : 1 - 10 flashes per second at 0.8 j
Range 2 : 10 - 100 flashes per second at 0.2 j
Range 3 : 100 - 250 flashes per second at 0.1 j
Main flashing power 5 W approx. Accuracy 2% f.s.d. on each range. The flash duration is of 12 U seconds approx. Triggering - internal oscillator. External shorting contacts.
Overall dimensions : 210 x 170 x 175 mm.
 
Student Sonometer  [109.11 PH]
 
Comprising wooden board 690 x 90 mm mounted on four feet, at one end of the box are two 5 kg x 100 gms spring balances with hooks & at the other end are two wrest pins with 3 bridges out of which one is large to span both wires & the other two are small for the individual wires. Complete with steel wires & pins.
 
Sonometer  [109.12 PH]
 
Comprising a hollow wooden box 1140 x 125 x 100 mm with 2 meter rules divided in mm. Two wires of brass & steel attached to fixed bridge & tensioned by fine adjustment pegs. Two movable bridges, pulley & fixed screw to enable a third wire to fixed for tensioning by masses. Complete with two bridges.
 
Tuning Forks Set, Blue Steel  [109.13 PH]
 
Set of 8 of blue steel, plain shank, one each of C(256) D.E.F.G.A.B.C. (512) in velvet lined box.
 
Tuning Forks, Set of 13  [109.14 PH]
 
Chrome plated, with frequency marked, set of 13, of different frequencies from 256C to 512C, packed in velvet.
 
Tuning Forks, Set of 13  [109.15 PH]
 
Same as above - made of rustproof aluminium alloy.
 
Tuning Forks on Resonance Boxes  [109.16 PH]
 

Set of 3 forks, two C256 & one C512 mounted on resonance boxes with brass plates drilled & threaded to take the threaded shanks of the forks. The length of each box is carefully adjusted to suit the frequency of the fork & is mounted on cork feet.

Dimensions :  
  340 x 112 x 47 mm ( C256 )
  125 x 112 x 47 mm ( C512 )
 
Set of Four Forks on Box  [109.17 PH]
 

For demonstration of the formation of a basic major chord. Comprises four forks mounted on a common box & having frequencies of C256 Hz, E320 Hz, G384 Hz, & C512 Hz. When sounding together, the forks produce the chord of C major.

Dimensions of Box : 285 x 115 x 63 mm.
 
Hammer for Tuning Fork  [109.18 PH]
 
Made of wood with rubber head.
 
Stethoscope  [109.19 PH]
 
A high quality professional pattern model for human heart & chest sounds with combination chest piece giving a choice of bell or diaphragm. Complete with spare diaphragm.
 
Electrical Tuning Fork  [109.20]
 
On sturdy streamlined base with provision for vertical or horizontal use. Fork is manufactured from selected steel. Prong is 10 x 25 x 300 mm. Accurate frequency adjustment; chrome plated, vibration rate 60 per second. Electromagnet can work on 6 Volts. The amplitude of vibration can be varied by sliding the electromagnet inside the prongs. Complete with stylet, mirror & counterpoise.
 
Electrical Vibrator  [109.21 PH]
 
For Melde's & other experiments. A steel rod is clamped near one end through two 4 mm terminals. The rod passes through a small solenoid & between the poles of a magnet. Adjustable contact points fitted through another pair of terminals make alternating connection with an adjustable contact on the rod. The rod has a small hole at one end for the attachment of thread which passes over a bench mounting pulley & supports a scale pan. For 2 V Ac supplies. Complete with pulley & clamp, scale pan, & instructions.
 
Melde's Apparatus  [109.22 PH]
 
To demonstrate stationary waves by means of stretched strings. Consists of an electrically maintained tuning fork, bench clamp pulley, scale pan, & meter scale.
 
Organ Pipe  [109.23 PH]
 

Varnished wood with glass front & membrane suspended on cord for loading with sands to show positions of nodes & anti nodes.

Overall length : 760 mm.
 
Organ Pipe, Sliding  [109.24 PH]
 

With graduated sliding piston. The organ pipe is of a square section, of polished wood & fitted with a tapered mouthpiece. The slider is also square in section 32 x 32 mm, of wood & with a knob at the end for easy control. The slider has a scribed & lettered line for each note which may be aligned with the end of the pipe to give a diatonic scale from C256 to C512.

Overall dimensions closed : 540 x 50 x 50 mm.
 
Organ Pipe, Open  [109.25 PH]
 

Open ended, square section, with tapered mouthpiece. The pipe is of polished wood & has an air column length of 405 mm approx. which gives a note approximating to A426.

Overall Dimensions : 520 x 50 x 50 m.
 
Whirling Table  [109.26 PH]
 
Overall height 430 mm, for use in vertical or horizontal position, fitted with hand wheel & wire helix belt drive to pulley & with the adapter supplied all except colour disc.
 
Savart's Toothed Wheels  [109.27 PH]
 
A set of four toothed wheels 75 mm dia on a common spindle. The wheels have 40, 50, 60, & 80 teeth respectively, giving intervals of 1:5/4:3/2:2 & thus forming the basic major chord.
 
Resonance Apparatus, Glass  [109.28 PH]
 
A glass tube 340 x 25 mm mounted on retort stand with clamp & boss head, with 500 ml glass bulb, connecting tubing & spring clip supported on rubber covered split iron ring.
 
Resonance Apparatus  [109.29 PH]
 
Consists of a resonance tube brass N.P. 100 cms, reservoir brass N.P. 250 ml & meter scale both sides mm which are mounted on wooden polished board. The reservoir is caged in wooden block that has sliding & clamping arrangement on the board. The board is mounted vertically on heavy metal base with synthetic hammer finish with levelling screws. Complete with rubber tubing.
 
Resonance Apparatus, Simple Form  [109.30 PH]
 
For measuring the resonant length of an air column driven by a tuning fork. Comprises a brass tube 290 x 25 mm dia fixed to a base 150 x 150 x 20 mm with a sliding inner tube 300 mm long which allows the length of the air column to be varied from 350 to 530 mm.
 
Resonance Tubes  [109.31 PH]
 
Comprising two glass tubes, one 300 x 32 mm & the other 300 x 25 mm. The smaller tube slides inside the wider tube in foam plastic collars, allowing the air column length to be varied from 300 to 530 mm.
 
Kundt's Tube Apparatus  [109.32 PH]
 
Consists of a glass tube heavy walled 1350 x 32 mm with cork bung, short & long ebonite rod, cork pistons, mounted on a polished wooden board 1520 x 125 x 22 mm with spring clamps. The long ebonite piston is supported by wood clamp secured with wing nuts.
[1]
Notice: Undefined variable: key in I:\wamp\www\vitco\product.php on line 221
2
Notice: Undefined variable: key in I:\wamp\www\vitco\product.php on line 241
[ Next»]
Home|Profile|Enquiry|Contact
© Copyright 2006. Vinay Trading Co. All Rights Reserved.