logo  
Product Range
bottom Shadow
 
 
   
 
Physics lab
[1]
Search Results : 28 Product(s) Found.
 
Force Table  [105.32 PH]
 
For verifying the laws of composition and resolution of forces, comprising a machined aluminium table 40 cm dia. Its raised rim has engine divided scale graduated 360, on heavy vertical support rod and tripod base. Complete with 1 ring, 4 sliding clamp pulleys, 4 weight hangers and 12 weights (2 x 10 gms, 2 x 20 gms, 4 x 50 gms, 4 x 100 gms).
 
Parallelogram of Forces Apparatus  [105.33 PH]
 
For verifying the relation between forces acting at a point. Board 750 x 500 x 12 mm on battens, with two aluminium pulleys 50 mm diameter, with clamp for mounting in any position; four S-hooks, scale pan 100 mm diameter. Without masses.
 
Pulley-Single Plastic  [105.34 PH]
 
Polypropylene pulley of diameter 50 mm mounted in an aluminium frame with hooks.
 
Pulley-Single Metal  [105.35 PH]
 
Made of aluminium pulley of diameter 50 mm mounted in brass frame with hooks.
 
Pulley-Double Parallel Plastic  [105.36 PH]
 
With two wheels of polypropylene pulleys of diameter 50 mm in an aluminium frame with hooks.
 
Pulley-Double Parallel Metal  [105.37 PH]
 
With two wheels of aluminium pulleys of diameter 50 mm in an brass frame with hooks.
 
Pulley-Triple Parallel Plastic  [105.38 PH]
 
With three wheels of polypropylene pulleys of diameter 50 mm in an aluminium frame with hooks.
 
Pulley-Triple Parallel Metal  [105.39 PH]
 
With three wheels of aluminium pulleys of diameter 50 mm in an brass frame with hooks.
 
Pulleys-Double in Line Plastic  [105.40 PH]
 
Two polypropylene pulleys of diameter 50, 40 mm in an aluminium frame with two hooks.
 
Pulleys-Double in Line Metal  [105.41 PH]
 
Two aluminium pulleys of diameter 50, 40 mm in brass frame with two hooks.
 
Pulley-Triple in Line Plastic  [105.42 PH]
 
Three polypropylene pulleys of diameter 50, 40, 30 mm in aluminium frame with two hooks.
 
Pulley-Triple in Line Metal  [105.43 PH]
 
Three aluminium pulleys of diameter 50, 40, 30 mm in brass frame with two hooks.
 
Pulley, Differential, Aluminium  [105.44 PH]
 
A one-piece triple pulley with diameters of 38, 51 and 63.5 mm in metal frame with hook.
 
Pulley, Aluminium, Single Clamp type  [105.45 PH]
 
A 50 mm diameter pulley with a wide groove, mounted in iron frame, designed for clamping to the edge of a bench with the pulley in a vertical plane. The clamp will accept a bench top of up to 25 mm thickness.
 
Pulley All Purpose  [105.46 PH]
 
Aluminium pulley 50 mm diameter with groove for cord, mounted in iron frame. The frame is universal type with 2 clamping screws. The pulley can be clamped in any position on bench, rod upto 13 mm dia. Wall or on table etc.
 
Pulley Block (Midget Hoist)  [105.47 PH]
 
Tested to 680 Kg. For safe working load of 225 Kg. Two four blocks lubricating wheels 32 mm diameter safety hooks at top and bottom and autogrip device, with nylon rope 22m long for lift 2.5m lift. Mass of unit 0.7 Kg.
 
Pulley All System  [105.48 PH]
 
Almost every kind of pulley experiment can be demonstrated with the help of this equipment. It is very much interesting and of educational value to students, comprising of wooden polished base of 100 x 20 cm size with two metal supports, and a horizontal bar having eight adjustable collars with hooks from which pulleys can be suspended. The following accessories are provided with the unit. Single pulley with hooks 7, Pulley Triple long 2, Pulley Triple parallel 2, Wheel and axle 1, Capstan 1, Slotted weights hanger 50 gm 7, 10 gm 3, 20 gm 3, 50 gm 2, 100 gm 7, 200 gm 4. Note : Slotted weights and hangers are made of iron chrome-plated.
 
Pulley, Rod Type  [105.49 PH]
 
Aluminium pulley 38 mm diameter, mounted on light alloy rod 10 mm diameter, 150 mm long.
 
Pulley, Board Mounting  [105.50 PH]
 
Aluminium pulley, 22 mm diameter, in metal bracket with mounting plate 35 mm long, with fixing holes.
 
Pulley, Aluminium, Plain Bearing  [105.51 PH]
 
Comprising a 70 mm diameter pulley with a wide groove for whipcord, mounted in an iron frame designed for clamping to the edge of a bench with the pulley in a vertical plane. The clamp will accept bench tops of upto 25 mm thickness.
 
Screw Jack  [105.52 PH]
 
For demonstrating the efficiency and coefficient of friction. Grooved light alloy platform, 17.5 cms diameter; screw with 12 mm pitch square thread; cast iron base with arm and clamp for holding pulley on stem at any height. With scale pan 15 cms diameter and 2 meter cord.
 
Screw Jack  [105.52 PH]
 
For demonstrating the efficiency and coefficient of friction. Grooved light alloy platform, 17.5 cms diameter; screw with 12 mm pitch square thread; cast iron base with arm and clamp for holding pulley on stem at any height. With scale pan 15 cms diameter and 2 meter cord.
 
Train of Gear Wheels  [105.53 PH]
 

For demonstrating the relationship between velocity ratio and number of teeth. Three gear wheels, approximately 60, 80, 110 pitch diameter, with 12, 18, 24 teeth respectively, each mounted on wooden board provided with grooves for adjusting gear wheels by changing belt.

Overall dimensions : 240 x 260 x 300 mm. approximately
 
Simple Wheel and Axle  [105.54 PH]
 

Two wheels 150 mm and 75 mm diameter formed from solid hardwood with flat bottom grooves. Supplied with metal axle and cord.

Dimensions : 150 mm diameter x 45 mm.
 
Wheel and Axle Compound  [105.55 PH]
 
Made of cast aluminium alloy wheel 100 mm dia axle 50 mm and 25 mm dia, mounted on adjustable steel cones in steel frame, mounted on a wooden board with 4 holes for wall mounting complete with 5 meter Nylon cord and steel hook.
 
Double Cone on Ramp  [105.56 PH]
 

The inclined plane consist of two tapered slats conversing at their lower ends. When the double ended cone roller is placed on the plane, it rolls towards the high end. Thus the centre of mass of the roller is lowered as the roller moves "up" the slope made of hardwood polished.

Dimensions : 700 x 40 x 70 mm.
 
Projectile Apparatus  [105.57 PH]
 
To illustrate that a body impelled horizontally will fall vertically at the same rate as a similar body allowed to fall freely. Comprises spring loaded, L section launcher with holes for locating two 19 mm dia steel balls which act as projectiles. Launcher is released by push button and projects one ball forward which allows the other to fall freely mounted on wooden block, 180 x 60 x 30 mm with storage pocket for balls. Complete with 2 steel balls.
 
Collision in Two Dimensional Kit  [105.58 PH]
 
Curved ramps 260 x 325 mm. Length x radius with metal ball track, fitted to base 140 x 90 mm length x width, one adjustable ball supports, one clamp to fit slot on base of ramp. One plumb line assembly and 2 steel ball 12 mm dia.
[1]
Home|Profile|Enquiry|Contact
© Copyright 2006. Vinay Trading Co. All Rights Reserved.