Product Range
bottom Shadow
Chemistry Lab
Search Results : 21 Product(s) Found.
Physical Balance  [201.9 CH]

It is sensitive precision balance.

Technical Data :  
Beam : Finest light brass beam
Knife-edges and planes : Made of finest agate
Arrestment : To beam and suspensions highly polished metal pillar fitted with six point Arrestment and extended support and single block guide.
Case : Wodden polished case with divided doors.
Maximum Capacity : 250 Gms
Sensitivity : 1mg
Chemical Balance  [201.10 CH]

For use in colleges and Industrial Laboratories.

Technical Data :  
Beam : Short beam of hard brass. The upper edge divided into 50 scales divisions to each side. Each scale division representing 1/5 mg. Rider on the scale.
Stand : All parts of brass.
Arrestment : Vertical raising type.
Pans : Chromium plated, slightly concave inwards.
Case : Wooden polished case, with front slider and two side doors.
Base : Sunmica black board.
Capacity : 200gms
Sensitivity : 1/5 mg
Balances Cases  [201.10 CH]

Highly polished hard wood, sliding front door, realease catch device on the side, large enough to accomodate balance .

Capacity : 250 gms
size : 180x400x375 mm
Balance Covers  [201.11 CH]
Made of PVC with welded seams 460x120x360mm
Analytical Balance  [201.12 CH]

Rapid weighing short triangular beam analytical balance suitable for research Laboratories for precision work.

Technical Data :  
Beam : Triangular short beam gun metal alloy. The rider scale fitted infront of the beam is provided with 100 notches with zero at the centre.
Knife edges and Planes : Made of finest agate.
Arrestment : Vertical raising type.
Stand : All parts of bras
Pans : Chromium plates, slightly concave inwards dia 7.5 cm.
Case : Teak-wood polished case with front slider and two side doors.
Base : Sunmica black board.
Maximum Capacity : 200 gms
Sensitivity : 1/10 mg
Balance Chainomatic  [201.13 CH]

Eliminates entirely all fractional weights and thereby speeds up weighings. Specially suitable for industrial and Technical Laboratories.

Technical Data :  
Chainomatic arrangement : A gold chain is suspended from the beam with its other end screwd on a rotating drum on which a scale is graduated from 0 to 110 divisions, each division representing 1 mg. By the movement of this scale before a vernierr reading upto 1/10 mg. is taken.
Air Damping Arrangement : It is specially provided to make the oscillation aperodic and rapid.
Beam : Flexure freebridge type beam without graduation. Made of special alloy.
Stand : All brass including capot and base.
Arrestment : Circular type to give longer life to knife edges.
Knife Edges and planes : Finest agate, accurately ground.
Pan : Chromium plated, slightly concave inwards.
Case : Highly polished, well seasoned teak wood case.
Base : Synthetic black board.
Capacity : 200gms
Sensitivity : 1/10mg
Length of beam : 14cm
Height of stand : 26.5cm
Height of Long suspension : 21cm
Pan Diameter : 7.5 cm
Balance Air-Damped  [201.14 CH]

Aperiodic balance with short and compensatory suspension. A very popular model for routine use in Scientific Industrial laboratories and high classes. Time of ascillation reduced by Air Damping.

Technical Data :  
Beam : Short beam of hard gun metal alloy, The upper edge divided into 50 scale divisions to each side. Each side divisions representing 1/5 mg when placing a 10mg rider on the Scale.
Stand : All brass including capot and base.
Arrestment : Automatic Precision Parallel Arrestmewnt .
Knife Edges and planes : Finest agate, accurately ground.
Case : Highly polished, well seasoned teak wood case.
Base : Synethetic Black Board.
Capacity : 200gms
Sensitiveness : 1/10mg
Length of beam : 14 cm
Height of stand : 26.5 cm
Height of Long suspension : 21 cm
Pan Diameter : 7.5 cm
Beranger Balance  [201.15 CH]
Cast iron moulded body. All working parts of tempered steel, easily replaceable single piece wide beam. Spray painted finish, both side removable stainless stewel pan dia 200 mm, with protection bearings and pointer at the centre, useful for quick weighing of heavy articles. 











Double Beam Balance  [201.16 CH]
Twin pam balance for accurate and rapid weighing of masses upto 2 Kg when used with supplementry masses. The balance has a cast alloy base and feature angled beams with centre reading poises; undivided tare beam with a poise which slides and rotates for fine adjustment; spring loaded zero adjust compensator; precision ground knives and cross braced aluminium alloy box end beam. Equipped with facility for under balance weighing. Beams 0-200g X 10g, 0-10g X 0.1 g Tare 224 g Pan, stainless steel, 150 mm diameter.
Triple Beam Balance  [201.17 CH]
A single pan, low from beam that will weigh upto 2610 gm when used with supplementry mases. the balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses are hung on the end of the beam increasing the capacity by upto 2610gm. and they can be stored in the recessed base when not required with magnetic damping for quick weighing. Equipped with facility for under balance weighing. Beams : 0-500 g x 100g; 0-100g x 10g; 0-10g x 0.1g Supplimentry masses 2 x 1000 gm & 1 x 500gm Pan, stainless steel, diameter 150mm
Balance Four Beam (Suspended Pan)  [201.18 CH]

A 4 beam balance with a suspended pan. Beams notched. Four beams each provided with a slider, and graduated 0-200g x 100g, 0-100g x 10g, 0-10g x 1 g and 0-1g x 10mg respectively.

Weighing capacity : 311g.
Sensitivity : 0.01g. .
Height of Stirrup approx : 190mm
Balance Bridge  [201.19 CH]

Made of Aluminium, for density determinations using a beam balance with the pan and stirrup retained in position.

Dimension : 130x50x50mm high.
Forcep  [201.20 CH]
Brass chrome plated, with curved ends, length 90mm
Analytical Masses  [201.21 CH]
Weights are of brass chrome plated in 1-2-2-5 series in velvet lined wooden box nicely polished with hinged lid. One 10 mg rider and forcep. Transparent cover to protect the fractionals from dust. Accurate. 





Set of 1 mg to




Lever (Letter) Balance  [201.22 CH]

The bvalance frame is of aluminium casting having three point base with a levelling screws. The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan. The changeover is effected by a swing over mass on the pointer arm. A hook is provided below the pan for relative density and upthrust determinations.

Overall Dimensions : 250x320 mm width x height
Balance Weight  [201.23 CH]
Single pieces, of Chromplated brass, in open wooden block with forceps and frictional weights 1mg to 500mg Set consists of 1,2,35,10,20,50,100,200,500,1000,2000 gm.
Masses Set (General Purpose)  [201.24 CH]
Precision of chrome plated in1-2-5 series. Minor fractionals are of aluminium and major fractionals are of Brass, 10mg rider is nickelled, complete box to protect them from loss. Set is in polished wooden box. 






Set of 1 g to 100





Fractional Masses  [201.25 CH]
Set of fractional analytical, 1 mg to 500mg in 1-2-2-5 series in plastic case. Most accurate.
Personal Weighing Scale  [201.26 CH]
Platform-type scale, calibrated 125x0.5 kg. With zero adjustment and magnifier over scale opening. Accurate, sensitive and portable.
Household Weighting Scale  [201.27 CH]

A highly acurate and sensitive scale, exclusive durable ultramodern shape. Wide view dial, large scoop pan, anti rust coated part.

Capacity : 5 Kg x 25 gms.
Mail/Lab Scale  [201.28 CH]

For weighing chemicals and related items and mixing ingredients in proportions. This scale is highly accurate and sensitive scale, slim line exclusive Durable Ultramodern Shape.

Capacity : 1/2 Kg. x 5 gm.
© Copyright 2006. Vinay Trading Co. All Rights Reserved.